Crimping Terminals to Make Wire Harnesses
by
ChristopherG Bell
Making a wire harness can be difficult. It is best to leave this job up to a professional who knows what they are doing. The company you choose to get your wire harness made at will cut and strip the wire for you. As well as crimp all the terminals on and then attach all the terminals to the housing unit. The company will also make sure that each wire is attached to the correct terminal to make sure the harness itself will work the way the customer needs it to.
Cut Wire
The first step in making the wire harness is that the wire needs to be cut. It can be cut to any length that the customer needs. This is an important step. By cutting the wire to length then the customer doesnt have to get stuck buying more wire than they need. This saves the customers money.
Strip Insulation
Second the insulation on the wire needs to be stripped back. This exposes the copper conductor of the wire and allows the terminals to be crimped in the next step. The insulation is usually stripped off of each end about one eight of an inch.
Crimp Terminal
Once the wire has been cut to the specific length and stripped off that is when the terminals can get crimped on. Each hook up wire and each terminal have their own specific uses. So it is very important that the correct wires are getting crimped with the correct terminals.
ISO 9001 Certified
It is best to use an ISO 9001 certified company when ordering a wire harness. This way as a customer you know that you are getting the highest quality product back. In order for a company to be ISO certified the company needs to adhere to strict manufacturing guidelines. As well as go through monthly audits to make sure that the company is doing everything that they are supposed to. By using an ISO certified company you as a customer can be sure that your wire harness will be manufactured right and that they can handle the job no matter what size harness you need.
Wire harnesses should be manufactured by professionals. As a customer you want to make sure that the job gets done right. The company will cut the wire to the correct length for you. Strip the insulation off for you as well. So you know the wire wont get broken or nicked in the process. The company will be sure to attach all the correct wires to the terminals. Plus with the ISO certification shows the customers that the company takes pride in their work and that they are held to the highest quality standards.
WesBell Electronics
is an approved distributor of wire and cable from over 100 vendors. We can provide you with the ISO certified
Wire Harnesses
that were mentioned in this article. Please call if you need further assistance. (800)334-8400.
Article Source:
Crimping Terminals to Make Wire Harnesses }